ELECTRICAL MOTORS
We distribute electric motors for industrial, commercial and agricultural applications. We offer these motors in various configurations and types whether you need a motor for a general purpose application or a severe duty process application we have you covered. We stock low voltage AC motors from one- third to 600 horsepower for quick delivery.
CIRCULATING SUBS in Bahrain, CIRCULATING SUBS in UAE, CIRCULATING SUBS in Saudi Arabia,
VPD AND SOFT STARTERS
Choose Soft Starters for
CONTROLLED STARTING
Acceleration time, torque and current limits, even slow speed jogging are all available Consistent, reliable electronic overload protection.
LESS MAINTENANCE
Reduce the torque surge when your motor starts and you reduce damage to bearings and couplings, gearboxes, chains, belts and pulleys Reduce water hammer in pipes, mechanical shock on conveyors and loads, and cavitation in pumps.
LOWER PEAK CURRENT DEMAND
Lower peak charges from the utility Smaller dips in line voltage Minimize stress on motor windings, especially in large motors
NEMA 4/4X PANELBOARDS
An ideal low voltage power distribution panel for harsh and corrosive applications. Built using our high quality, field-proven Ex-CELL enclosures, the XLPB Panel board provides long product life, NEMA 4X protection, and easy installation
FEATURES:
• Heavy duty welded mounting feet provide ease of installation (customer can easily support the panel with bottom mounting feet, while fastening the top feet)
• High quality foam-in-place gasket prevents ingress of water and corrosive agents, reducing panel failure due to moisture/corrosion
• An integral drainage channel allows for opening the panel door without moisture or dust seeping into panel from the top side of the enclosure
• An internal/external ground stud assembly enables rapid and reliable protective ground connection
• Industrial grade NEMA 4X panel designed for harsh environments provides long product life
CIRCULATING SUBS in Bahrain, CIRCULATING SUBS in UAE, CIRCULATING SUBS in Saudi Arabia,
MOTOR CONTROL CENTERS
Motor control centers & switchgear iec type tested or ul certified •Design Verification compliant with IEC/EN 61439-2
•Type Tested to comply with IEC/EN 60439-1
•Verified to UL 67, UL 508 A, UL 845 and UL 891
•Verified to CSA C22.2 No. 14-95, No. 31-M89, No. 29-M1989
New, after-market and factory discontinued equipment Refurbish and retrofit FD equipment with new components. Most manufacturers supported
•Main bus available up to 6300 Amps
•Construction and main bus bracing up to 120kA(1s)
•Enclosures available up to IP54 / UL Type 12
•Choose from multiple component manufacturers
•IEC or NEMA starter ratings
•Modular construction makes MCC units consistent; changes and additions in standardized sizes
•Wheels available for installation in tight spaces
•Integrated control console and desks available
•Laser cut and engraved door diagrams
•Nameplates made in-house to your specifications, including localized and multi-lingual designs
EXPLOSION PROOF STARTERS / COMBO
These enclosures are designed so that the hot gases generated during an internal explosion are cooled below the ignition temperature of the surrounding flammable atmosphere as the gases are transmitted through the joints of the enclosure. Any parts which are not rated for hazardous area can be installed in these enclosures and then the assembly becomes rated. There are some exceptions apply, that which parts can’t be installed in these enclosures.
EXPLOSION PROOF CIRCUIT BREAKERS /DISCONNECTS
• Circuit breakers are thermal magnetic type and are available in frame sizes ranging from 15 to 800 amperes
• Also available as non-automatic circuit interrupters, without automatic overload trip elements for load switching and isolation.
• Short circuit and overload protection must be provided by separate protection device
• Breakers available for magnetic trip only
• Can be set up for GE, Cutler-Hammer (Westinghouse), Square-D and ITE (Siemens) brand circuit breakers. Consult factory for other brands
• Holes for Cutler-Hammer circuit breakers are drilled directly into back Wall
SWITCHRACKS
Providing free standing switchrack and switchgear assemblies that provide motor control and distribution assemblies in one complete package.
• Power bussing
• Lightpanels
• Welding receptacles
• Motor starters
• Drives, soft starters, plc’s • Instrumentations
LIGHTNING
We offer a wide range of products including explosion proof lighting, portable hazardous location lighting, high powered LED lights, hand held 12/24 Volt lighting, light towers and portable power distribution panels with large KVA transformers. Our products are used by manufacturing facilities, refineries, military bases, paint spray booths, oilfield operations, shipyards and food processing plants.